Products

Surromax high pressure integrated solar water heater is a all-glass vacuum solar water system combined with heat pipes inside the glass tube. The selective coating on the inner tube converts solar energy into heat energy and transfers to the heat pipe by an aluminum fin. The liquid in the heat pipe is changed into vapor which rises to the condenser on top of the pipe. The heat conducts the water inside the tank and the vapor becomes liquid, returning to the base of the heat pipe. This continuous circulation transfers heat from the heat pipe to the cold water in the tank as long as sun is heating the vacuum tube. Hot water can be obtained by injecting cold water from the bottom of the tank  

Features: 

☆The system can still operate in the event of occasional tube breakages;

☆Can operate with water pressure up to 0.6MPa;

☆No additional device for automatic filling water to the tank;

☆More pressure, more comfortable;

 

Specification:

Inner tank:  SUS304-2B (food grade) Stainless Steel 1.5 Thickness

Outer tank:  Galvanized Steel / Stainless Steel SUS 304/BA 0.4mm Thickness

Insulation layer:  Polyurethane Foaming 50mm Thickness

Bracket:   Galvanized Steel / Stainless Steel 1.5mm Thickness

Heat Pipe Vacuum Tube:  3-Target Vacuum Tube with AlN/AlN-SS/CU coating and Copper Pipe inside, Size:  58x1800mm.

System Capacity:  100 ~ 260L

Working pressure:  0.6 Mpa (6 Bars)

Optional Accessories:  Electric Heater, Controller, Magnesium Stick, etc.